ARES 59007-13/16-Inch 1/2-Inch Drive Non-Marring Lug Nut Socket - Protective Sleeve Prevents Damage to Custom Rims & Lug Nuts - Color Coded & Laser Etched for Easy Identification
تفکیک هزینه ها
هزینه حمل و گمرک:
تحویل 4 تا 7 هفته کاری
ضمانت اصالت و سلامت کالا
ارسال رایگان در سراسر ایران
Protect Your Rims
The ARES 13/16-inch Non-Marring Lug Nut Socket will remove bolts while preventing damage to your aluminum or custom rims, thanks to its protective vinyl jacket. The hollow design allows room for removing longer bolts, and the non-marring insert will protect your lugs. Made with chrome molybdenum, its strong enough to use with an impact wrench without worrying about damaging your new car or aftermarket rims. Protecting your big investment with the right tool makes sense.
Includes: 1 pc. 13/16-inch non-marring lug nut socket
Overall length is 85mm, or roughly 3 3/8 inches
Protective vinyl jacket prevents damage to aluminum or custom rims
Hollow design allows removal of longer bolts
Non-marring insert protects lugs
Constructed of chrome molybdenum steel
Note: Some wheels have very confined lug wells and the outer nylon sleeve may be prohibitive in accessing the lug
Protect Your Investment
Whether its a new car or just new rims, you want to keep your vehicle looking its best. Our non-marring sockets will help prevent damage to your wheels bolt tops, rims, and lug nuts and help them stay in peak condition.
The Length You Need
This 13/16-inch 1/2-inch drive Non-Marring Lug Nut Socket is 85mm (roughly 3 3/8 inches) in overall length, so its perfect when you need a little extra length for longer bolts or even hard to reach bolts.
Quality You Need
Made of Chrome Molybdenum Steel, this socket is tough enough to stand up to impact use, but thanks to its hollow 6-point thin wall design and protective vinyl sleeve, you wont have to worry about scratching your aluminum or custom rims during service.
5-Piece Flip Lug Nut Socket Set
Professional Brake Line Flaring Tool
2-Liter Manual Brake Fluid Pressure Bleeder
12-Piece Master Cylinder Adapter Set
Front End Service Set
Double Flaring Tool Set
Set includes a 3-inch 1/2-inch drive extension bar and four flip sockets in the following sizes: 17mm / 19mm, 21mm / 22mm, 3/4-inch / 13/16-inch, and 7/8-inch / 15/16-inch
Set includes Professional Brake Line Flaring tool, 3/16-inch, 1/4-inch, 5/16-inch, and 3/8-inch Dies
Manual Brake Fluid Pressure Bleeder and 42mm adapter
Set includes one rectangular adapter for Chrysler and GM vehicles, one adapter for Toyota and Lexus vehicles and ten round adapters with the following internal diameter sizes: 29mm, 34.5mm, 42mm, 43.5mm, 47mm, 49.5mm, 50.7mm, 56mm and 74mm.
Set includes: a 1 5/16-inch (33mm) Pitman Arm Puller, a 1 1/16-inch (27mm) Pitman Arm Puller, a 22mm Ball Joint Separator, a 19mm Universal Tie Rod End Tool, and an Outer Tie Rod Remover tool.
Set includes: Double flaring tool, Mini tubing cutter, 1/4-inch adapter, 5/16-inch adapter, 1/2-inch adapter and two adapters in each of the following sizes: 3/16-inch and 3/8-inch
These lug nut sockets can be used with an impact wrench, air ratchet, breaker bar, or torque wrench. The set includes some of the most popular lug nut sizes and is a must have inside your car for tire changes, brake jobs, and more..
This versatile Professional Brake Line Flaring Tool can be used to create a 45-degree double, bubble, or single flare in steel, stainless steel, copper, and aluminum tubing for brake lines, transmission cooler lines, or fuel lines.
This brake fluid bleeder allows you to easily pressure fill fluid into your entire brake system. The built in pressure gauge allows you to closely monitor the pressure system.
The Master Cylinder Adapters in this set are made to work with our brake fluid bleeders, so you can easily remove fluid and refill fluid into your entire brake system.
The press type ball joint separator allows for ball joint removal without damage to boots and other parts that typical fork type removers may cause damage to.
This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and soft steel brake line tubing.
Made of high strength Chrome Molybdenum Steel, the Electro-Phosphate finish combined with laser etched size markings provides a sleek look and high visibility
This tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily.
Features a convenient one-person operational design with a 2L corrosion resistant reservoir built to handle your toughest jobs
This set comes complete with a custom molded case for easy transportation and storage.
The tools are constructed from high quality heat treated drop forged steel to ensure longevity and durability over the lifetime of the tools
The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in reducing friction.
|Product Dimensions||1.2 x 5 x 1.2 inches|
|Date First Available||November 5, 2015|
|Item Weight||5.6 ounces|
|Manufacturer Part Number||59000590035900459005590065900759011|