PrimoChill Opaque - Pre-Mix (32oz) - Cobalt

PrimoChill Opaque - Pre-Mix (32oz) - Cobalt

PrimoChill

1905.0880799999998کیلوگرم

B07PXTP9Z9

3137400

3137400

0%

available

Product Description,Read more,Features,Water Based and Ecologically Sound,Handmade in Small Batches Unmatched Quality Control,Safe on all Industry Plastics and Rubber,Microbial Growth Combatant,Read more,Step 1 - Prepping,If your system is brand new we recommend using both Rad Clean and Sys Prep. If you have existing system, utilize our Rad clean and then move to step 2.,Step 2 - Cleaning old fluid out,System Reboot was created to pull old dyes and fluid out of existing PC builds. This is essential to use if you had any other previous fluids in your build that you plan to use PC Opaque in.,Step 3 - Final Prep and Protection,It has protective properties that help with both your PC Opaque lasting longer and its ability to keep the same color throughout its duration.,Step 4 - Add your final Vue,After going through all the proper prepping (follow our guide) youre ready to add your PC Opaque!,Vue,PC Opaque,True Opaque,True Transparent,PC Ice,Difficulty,Expert,Intermediate,Intermediate,Beginner,Beginner,Fluid Type,Show Fluid (performance properties),Performance Fluid,Performance Fluid,Performance Fluid,Performance Fluid,Available Colors,25,25,25,13,13,Biocidal Growth Inhibitors,✓,✓,✓,✓,✓,Recommended for Daily Use,✓,✓,✓,✓,Conductivity,Low,Low,Low,Low,Low,Non-Toxic,✓,✓,✓,✓,✓,Water Based,✓,✓,✓,✓,✓,PC Opaque Important Information,Maintenance As with all custom loop water-cooling, continual maintenance and frequent inspection is required. PC Opaque will need to be replaced every 6 months or sooner, depending on the complexity and conditions of your loop. This will be required to maintain the aesthetic appeal of your loop. Opaque coolants are to be monitored daily to ensure that there is no color change or any collection or separation of PC Opaque.,Staining The use of any colored fluids/dyes WILL ABSOLUTELY stain your components in your cooling loop including rigid and flexible tubing, acrylic reservoirs, and blocks. Prolonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components.,Color Loss During the initial application of PC Opaque, the product may change/lose its original color when added to your loop within the first 24-48 hours. This is a common, well known occurrence. If this happens to your system, immediately drain and flush it out with DI or Distilled water. Once the system has been drained and cleaned, refill your system with PC Opaque fluid once again.,High Pressure Systems The combination of high pressure loops and microchannel water blocks will accelerate the breakdown of PC Opaque coolant. We STRONGLY recommend using a pressure relief valve in every water-cooling loop.,Collection or separation of particles As with all Opaque fluids, buildup of particles in the micro channels of water blocks will occur over time. This buildup/blockage can cause the fluid in your system to flow slower and could possibly stop flow all together. System pressure also plays a role in how well PC Opaque performs. If you notice ANY collection or separation of True Opaque, drain and rinse your system IMMEDIATELY. Running your system with PC Opaque coolant after it has separated can cause unknown issues and could require the user to remove, open, and clean each individual component in the system.,Note: USE OF THIS PRODUCT WITH ALUMINUM COMPONENTS (SUCH AS ALUMINUM CONSTRUCTED RADIATORS) IS STRONGLY DISCOURAGED. PRIMOCHILL WILL NOT SUPPORT OR REPLACE FLUIDS USED WITH AN ALUMINUM COMPONENTS. USE OF THIS FLUID IS AT YOUR OWN RISK, PRIMOCHILL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY THIS FLUID.