Audio-Technica Instrument Condenser Microphone (ATM350D)

Designed for use with drums, the ATM350D Unmounts mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mica that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491D drum mount and strong, flexible AT8490 5" gooseneck, the mica can be securely fastened to the drum and positioned to stay where you want it. The drum mounts unique spring-loaded mechanism clamps it tightly to a drum lug (without hindering your ability to adjust the lug) and provides excellent shock resistance for the mica; the goosenecks rigidity ensures that it wont flop around no matter how aggressively you play. The microphones cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case. Features: Low-profile mica design for minimum visibility Crisp, clear, well-balanced microphone response, even at high SPLs Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source Unmounts drum mount with unique spring-loaded mechanism attaches securely to a drum lug, and provides excellent shock resistance for the microphone Rugged Unmounts 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise Interchangeable elements available for hyper cardioid and omnidirectional polar patterns Included violin mount with hook-and-loop fastener provides an additional mounting option Specifications: Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 40 - 20,000 Hz Low Frequency Roll-Off: 80 Hz, 12 dB/octave Open Circuit Sensitivity: -49 dB (3.5 mV) re 1V at 1 Pa Impedance: 200 Ohms Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (Typical): 130 dB, 1 kHz at Max SPL Signal-To-Noise Ratio: 65 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11- 52V DC, 3.5 mA typical Switch: Flat, roll-off Output Connector: Power Module: Integral 3-pin XLRM-type Cable: 4.0m (13.12') long (permanently attached to microphone), 3.2mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector Audio-Technical Case Style: M36 Dimensions: Microphone (L x Maximum Dia.): 37.8 x 12.2mm (1.49 x 0.48"), Power Module (L x Dia.): 92 x 18.9mm (3.62 x 0.74") Weight: Microphone: 14.5g (0.51oz), Power Module: 90g (3.17oz)