دانلود افزونه مرورگر کروم

Pair of Lowe Boats Outboards Decals Vinyl Stickers Boat Outboard Motor Lot of 2 (12", Orange 034)

Pair of Lowe Boats Outboards Decals Vinyl Stickers Boat Outboard Motor Lot of 2 (12", Orange 034)
مشاهده در آمازون آمریکا

  • برند:

    Stickerzon Decals

  • رنگ:

    Black 070
    Blue 067
    Brown 080
    Cream 023
    Golden Yellow 020
    Green 061
    Grey 071
    Light Brown 081
    Lime Green 063
    Orange 034
    Pink 041
    Purple 404
    Red 031
    Sky Blue 084
    Soft Pink 045
    Turquoise 054
    White 010
    Yellow 021

  • قیمت دلاری:

    $18.88

  • قیمت نهایی:

    1,188,300 تومان

به ازای خرید این محصول 11 امتیاز از باشگاه مشتریان ایگرد دریافت خواهید کرد.

خرید اقساطی

گزارش خرابی

تفکیک هزینه ها

قیمت/مبلغ ارزی:

429,900 تومان

هزینه حمل و گمرک:

628,500 تومان

کارمزد ایگرد:

129,900 تومان

  • 35 تا 55 روز کاری

  • ضمانت اصالت و سلامت کالا

  • ارسال رایگان در سراسر ایران

  • قیمت قطعی

  • Size:12  |  Color:Orange 034

  • Sizes: 12 X 3.5; 24 X 7 ; 36 X 11 . About Vinyl Decals: These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window. Vinyl Decals come in 3 pieces: 1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied) 2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing) 3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied) Application Tips: 1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 60°F and 90°F. 2. Do not touch the adhesive backing, oils from your skin will prevent sticking. 3. Before applying decal make sure there is no wax or oily products on the surface Application Instructions: 1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker. 2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces. 3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape 4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 5. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface. 6. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape. 7. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.

Date First AvailableDecember 28, 2016
ManufacturerStickerzon Decals
ASINB06X9F62YD
Is Discontinued By ManufacturerNo

نظرات یا سوالات خود را در مورد این کالا با ما در میان بگذارید.

  • با ثبت نظر 5 امتیاز از باشگاه مشتریان ایگرد دریافت خواهید کرد.

  • صفحه کلید خود را در حالت زبان فارسی قرار دهید.
  • در نظرات خود، تجربه، نحوه استفاده از کالا و سایر نکاتی که به نظرتان برای مشتریان ایگرد مفید به نظر می رسد را اعلام کنید.
  • از ارائه‌ی اطلاعات شخصی (مثل شماره تماس، ایمیل و آی‌دی شبکه‌های اجتماعی) پرهیز کنید.

محصولات مشابه

Pair of Lowe Boats Outboards Decals Vinyl Stickers Boat Outboard Motor Lot of 2 (12", Orange 034)
Stickerzon Decals
500کیلوگرم
B06X9F62YD
Pair of Lowe Boats Outboards Decals Vinyl Stickers Boat Outboard Motor Lot of 2 (12", Orange 034)
1188300
1188300
0%
available
AutomotiveExterior AccessoriesBumper Stickers, Decals & Magnets
Size:12  |  Color:Orange 034,Sizes: 12 X 3.5; 24 X 7 ; 36 X 11 . About Vinyl Decals: These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example. The background color will be the color of the surface you place the sticker on, or clear if you put it on a window. Vinyl Decals come in 3 pieces: 1. Top layer is a transparent transfer tape. (Holds your decal or sticker together until it is applied) 2. Middle layer is your actual decal or sticker (It is sandwiched between the Application Tape and the Wax Backing) 3. Bottom layer is the wax backing. (protects the adhesive until the decal is ready to be applied) Application Tips: 1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 60°F and 90°F. 2. Do not touch the adhesive backing, oils from your skin will prevent sticking. 3. Before applying decal make sure there is no wax or oily products on the surface Application Instructions: 1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker. 2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces. 3. Remove the wax backing slowly making sure the sticker stays adhered to the transparent transfer tape 4. Carefully position the sticker to the desired area. 5. Rub the sticker from one side to the other, eliminating any air bubbles. 5. Use a object like a credit card to make sure the entire sticker is fully adhered to the surface. 6. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape. 7. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.