3D Printer Resin, SUNLU 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing, Excellent Fluidity, 1000g Grey

3D Printer Resin, SUNLU 3D Rapid Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing, Excellent Fluidity, 1000g Grey

SUNLU

1270.05872کیلوگرم

B08CZJ9DV1

2358400

2358400

0%

available

Product Description,Precautions:,Recommeded temperature 20°C - 25°C,Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight. Wear goggles in avoid of eye contact to resin.,Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.,SUNLU 405nm Standard Photopolymer Resin,Printing Setting:,Bottom Exposure:60s,Normal Exposure:6-8s,Printing thickness: 0.025-0.05mm,Number of bottom layers: 8-16,Hardness: 80D±10%,Shrinkage: 4-5 %,Viscosity (25°C): 150-350MPa·s,Liquid Density: 1.05-1.25g/cm³,Solid Density: 1.195 g/cm³,Flexure Strength: 61.171±10%,Extension Strength: 49.118±10% Mpa,Elongation at Break: 10.002±10%,Read more,Excellent Fluidity,Low viscosity and good fluidity make it easy to separate the cured resin from the uncured one; Cutting down the printing time and improving the success rate on printing.,High Precision and High Compatibility,Methacrylate monomers reduce volume shrinkage during the photocuring process, which ensures the high precision of the print model with smooth finish.,Quick Curing,SUNLU UV resins can be rapid prototyping, greatly reduce the printing time while producing a consistent result, making it your go-to option for 3D resin.,Read more,Storage method:,Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).,It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.,Usage:,Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.,Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.,Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.,Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).,Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).