BETAFPV HX100 2-3S Frsky FPV Racing Quadcopter Carbon Fiber with F4 2-4S AIO 12A FC Caddx EOS V2 Camera OSD Smart Audio 0/25/200mW Switchable VTX 1103 8000KV Motor Micro RC Drone (Frsky FCC)
به ازای خرید این محصول 43 امتیاز از باشگاه مشتریان ایگرد دریافت خواهید کرد.
تفکیک هزینه ها
هزینه حمل و گمرک:
۲۸ تا ۴۸ روز کاری
ضمانت اصالت و سلامت کالا
ارسال رایگان در سراسر ایران
BETAFPV - A innovative company, is focused on the Micro FPV racing drone.
HX100, a 100mm small-size Toothpick carbon fiber drone. The first carbon fiber FPV racing drone of BETAFPV, which is small but contains much power, enable you to enjoy the indoor fun and explore the outdoor excitement.
F4 2-4S AIO 12A FC
This F4 2-4S AIO FC has a built-in current sensor, you could get a more accurate current value without the virtual current meter.
Light weight and easy install, this F4 2-4S AIO FC (BLHeli_S) is suitable for brushless whoop like 2S Pro 2 Series and 3S X Series.
It has weight of 5.6g integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC which can support 4S battery for fast flying experience.
The F4 2-4S AIO FC Brushless Flight Controller builted without receiver, supports Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and DSMX receiver since V1.2. Compatible receivers signal include PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
CPU: STM32F411CEU6 (100MHZ )/ Six-Axis: MPU6000 (SPI connection)
Firmware version: Betaflight MATEKF411 (MK41)
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Size: 26mm x 26mm, whoop mounting pattern / Built-in current sensor
Support BLheli/BLHELI_S suite Pass-through ready / Firmware: BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600I
Input voltage: 2S-4S / Continue current: 12A
Processor: SILABS EFM8BB21F16G / Factory firmware: G-H-30-16.7
Caddx EOS2 V2 CamandA01 VTX
Equipped with customized Caddx EOS2 V2 Camera with the A01 VTX, which is a 1/3 1200TVL CMOS FPV camera, a perfect match with HX100. Be able to transfer the instant image and provide high quality video.which output power is switchable includes 0mW, 25mW and 200mW, brings you a higher quality video and low RF interference
1103 8000KV Brushless Motors
Suitable for 3S POWER, highest speed increased obviously with 1103 8000KV motors. Customized lightweight only 3.8g/pc with strengthened cable connectors. It is more thicker which will not easy to break off. specially lengthened motor wires is suitable for toothpick drones Whole whoop no soldering or tinkering necessary, just plug and play
HX100 Carbon Fiber Thoothpick Frame
This thoothpick frame made of 3K Pure Carbon Fiber, ultra-light body that can be faster and steady in flight. Compatible with BETAFPV 1103 8000KV motors and F4 2-4S AIO 12A FC. Makes your 3S Toothpick whoop drone durable and fast enough
Comes with 2 type propellers
65mm 2-Blade 1.5mm Shaft Props
48mm 4-Blade 1.5mm Shaft Props
HX100 FPV Quad comes with two sets of props for you to choose, bring you different flight experience.
Highly suggest using 48mm 4-blade props with 300mAh 3S battery and 65mm 2-blade props with 350mAh 2S battery, switchable and affordable. To explore more fun of HX100 with different options.
1: Why I received the used/broken/empty box?
Sometimes AMZ will re-send the items which were returned by other customers. If you meet this issue. Please dont worry, BETAFPV support team will help you solve it at the first time.
2: Why I cant bind with my transmitter?
Please make sure the receiver and the transmitter belong to the same protocol. Eg: If receiver is Frsky FCC XM+ D16 mode, then you can use FCC version of the transmitter to binds when it is in D16 mode.
3: Why the motor doesn’t spin or spinning reversed?
If the motors spinning reversed, you could change the spinning direction in the BLHeli Configuration (Chrome APP) If the motor doesn’t spin, please switch the motor to other position to check, if the motor still doesn’t work, then the motor is defective. If not, the ESC is defective.
4: There is no video within a short distance?
Please check if there is only red LED flash solid, if yes it means the VTX is in PitMode. You can reset it through OSD menu to exist the PitMode, restore the VTX to 25mW or 200mW mode. More details of setting, please refer BETAFPV website.
5: How to Use the PitMode of A01 VTX?
PitMode allows racers to power up their video transmitters during race events without interfering with other racers and still having the ability to change VTX settings or do some testing. Range is limited to 2-3m and transmission happens on the selected frequency. The PitMode is active when only red LED flash solid.
|Package Dimensions||5.24 x 5.12 x 2.48 inches|
|Mfg Recommended age||16 year and up|
|Item Weight||6.2 ounces|
|Manufacturer recommended age||16 years and up|