AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY

امتیاز 27
AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
  • AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
  • AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
  • AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
امتیاز 27

برند:

AIMELIAE

وزن: 270 گرم

قیمت دلاری: 13.99$

قیمت نهایی: 986,400 تومان

به ازای خرید این محصول 9 امتیاز از باشگاه مشتریان ایگرد دریافت خواهید کرد.

1

1

تفکیک هزینه ها

قیمت/مبلغ ارزی:

393,300 تومان

هزینه حمل و گمرک:

!

480,400 تومان

!

کارمزد ایگرد:

112,700 تومان

  • 35 تا 55 روز کاری

  • ضمانت اصالت و سلامت کالا

  • بیمه ۱۰۰ روزه ایگرد

  • ارسال رایگان در سراسر ایران

  • قیمت قطعی

  • Instruction:

  • Align the IC in the correct position and solder opposing pins. Then solder each successive pin taking care not to short out adjacent pins.

  • Mount the hardware – the headphone jack, the variable capacitor, the volume switch and the band switch.

  • Mount the two copper air-coiled inductors and LED

  • Bettery case:Keep the terminals loose on your bench and solder a red wire to the positive and black wire to the negative

  • solder a pair of yellow wires to the positive and negative of the speaker.

  • Now, the screws need to be sorted and the dials installed.

  • three long tapping screws (pointed end)

  • two short tapping screws (pointed end)

  • two identical machine screws (flat end)

  • one slightly different machine screw

  • make the final connections and assemble the unit.

  • First, slide the battery terminals into place – positive is the top terminal on the front case, negative is the lower terminal. Tack-solder the negative wire to GB-, and positive wire to GB+.

  • Next, solder the speaker wires with both yellow wires going to one SP terminal respectively. The AM rod antenna connections can be made by looping out the enamelled wire (over the top of the PCB is best) and tack soldering the ends to AM terminals.

  • The final connection is the FM antenna connection.

  • Note:

  • Different people may have different approach to assemble it, you can also search on google or YouTube for more sharing and detail, hope you have fun with this Kit.

نظرات یا سوالات خود را در مورد این کالا با ما در میان بگذارید.

  • با ثبت نظر 5 امتیاز از باشگاه مشتریان ایگرد دریافت خواهید کرد.

  • صفحه کلید خود را در حالت زبان فارسی قرار دهید.
  • در نظرات خود، تجربه، نحوه استفاده از کالا و سایر نکاتی که به نظرتان برای مشتریان ایگرد مفید به نظر می رسد را اعلام کنید.
  • از ارائه‌ی اطلاعات شخصی (مثل شماره تماس، ایمیل و آی‌دی شبکه‌های اجتماعی) پرهیز کنید.
AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
AIMELIAE
270کیلوگرم
B075FR788C
AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
AIMELIAE 1PC AM FM Radio Kit Parts CF210SP Suite For Ham Electronic Lover Assemble DIY
986400
986400
0%
available
Instruction:,Align the IC in the correct position and solder opposing pins. Then solder each successive pin taking care not to short out adjacent pins.,Mount the hardware – the headphone jack, the variable capacitor, the volume switch and the band switch.,Mount the two copper air-coiled inductors and LED,Bettery case:Keep the terminals loose on your bench and solder a red wire to the positive and black wire to the negative,solder a pair of yellow wires to the positive and negative of the speaker.,Now, the screws need to be sorted and the dials installed.,three long tapping screws (pointed end),two short tapping screws (pointed end),two identical machine screws (flat end),one slightly different machine screw,make the final connections and assemble the unit.,First, slide the battery terminals into place – positive is the top terminal on the front case, negative is the lower terminal. Tack-solder the negative wire to GB-, and positive wire to GB+.,Next, solder the speaker wires with both yellow wires going to one SP terminal respectively. The AM rod antenna connections can be made by looping out the enamelled wire (over the top of the PCB is best) and tack soldering the ends to AM terminals.,The final connection is the FM antenna connection.,Note:,Different people may have different approach to assemble it, you can also search on google or YouTube for more sharing and detail, hope you have fun with this Kit.