Adafruit PN532 NFC/RFID controller breakout board

Adafruit PN532 NFC/RFID controller breakout board
  • Adafruit PN532 NFC/RFID controller breakout board
  • Adafruit PN532 NFC/RFID controller breakout board
  • Adafruit PN532 NFC/RFID controller breakout board
  • Adafruit PN532 NFC/RFID controller breakout board

4.6

(10)

خرید این محصول توسط آمازون پیشنهاد شده است.

  • برند:

  • وزن:

    270 گرم

  • قیمت دلاری:

    $36.42

  • قیمت نهایی:

    1,503,100 تومان

به ازای خرید این محصول 15 امتیاز از باشگاه مشتریان ایگرد دریافت خواهید کرد.

تفکیک هزینه ها

قیمت/مبلغ ارزی:

829,300 تومان

هزینه حمل و گمرک:

507,400 تومان

کارمزد ایگرد:

166,400 تومان

  • 35 تا 55 روز کاری

  • ضمانت اصالت و سلامت کالا

  • ارسال رایگان در سراسر ایران

  • قیمت قطعی

  • The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and act like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip youll want to use! NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesnt require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags) The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer! Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1 header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a Mifare Classic 1K card! (You can get more tags from us here) New in version 1.3: onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc.

نظرات یا سوالات خود را در مورد این کالا با ما در میان بگذارید.

  • با ثبت نظر 5 امتیاز از باشگاه مشتریان ایگرد دریافت خواهید کرد.

  • صفحه کلید خود را در حالت زبان فارسی قرار دهید.
  • در نظرات خود، تجربه، نحوه استفاده از کالا و سایر نکاتی که به نظرتان برای مشتریان ایگرد مفید به نظر می رسد را اعلام کنید.
  • از ارائه‌ی اطلاعات شخصی (مثل شماره تماس، ایمیل و آی‌دی شبکه‌های اجتماعی) پرهیز کنید.
Adafruit PN532 NFC/RFID controller breakout board
Adafruit
270کیلوگرم
B00KKUECAO
Adafruit PN532 NFC/RFID controller breakout boardAdafruit PN532 NFC/RFID controller breakout boardAdafruit PN532 NFC/RFID controller breakout boardAdafruit PN532 NFC/RFID controller breakout board
1503100
1503100
0%
available
Industrial & ScientificIndustrial ElectricalWiring & ConnectingTerminal BlocksSensor Blocks
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and act like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip youll want to use! NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesnt require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag (and of course all the other NXP MiFare type tags) The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer! Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1 header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a Mifare Classic 1K card! (You can get more tags from us here) New in version 1.3: onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc.