How to use this paintless dent repair kits?
1.Use a line board to find the dent,clean the dent with a clean cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 3 minutes;
3.Pull the glue guns trigger to let the hot melt glue apply evenly onto the glue tabs;
4.Place the glue tabs with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Use the mini dent lifter/metal lifter bridge/T-handle dent puller/slide hammer to pull up the dent;
6. Check with a line board. If dent still exists, knock it slightly with a Rubber Hammer and tap down;
7. Clean the repaired place with a clean wet cloth.
1 pc Big Green Carry Bag
1 pc YellowandBlack Line Board
1 pc Blue Glue Gun(us plug)
10 pcs Black Glue Sticks(8x0.44inch)
10 pcs White Glue Sticks(10.6x0.44inch)
1 pc Golden Dent Lifter
1 pc Slide Hammer
1 pc Metal Lifter Bridge
1 pc Red Handle T puller
1 pc Rubber Repair Hammer
2 pc Metal Tap Down(2 heads)
1 Hail Repair Hammer
10 pcs Blue Glue Puller Tabs(5 different sizes)
9 pcs Black Glue Puller Tabs(9 different sizes)
10 pcs Red Glue Puller Tabs(10 different sizes)
7 pcs White Glue Puller Tabs(7 different sizes)
4 pcs Aluminum Glue Puller Tabs(4 different sizes)
1 pc Yellow Plastic Shovel
1 pc Red Plastic Shovel
1 pc Red Plastic Windows Wedge
6 pcs Black Dent Rods Tools With Different Sizes(C1-C6)
4 pcs Blue Dent Rods Tools With Different Sizes(B8-B11)
3 pcs S Hooks
3 pcs Metal O Rings
More Detail about the item:
An economical set designed to get you started in the Paintless Dent Repair field.
Includes 10 rods made from high quality alloy.
Rods have a Life Time Warranty.